Destiny Alfonso of Just Destiny Mag shows us the second part of her bathroom makeover using peel and stick backsplash tiles from The Home Depot. Read more to find out just how easy it is to install Smart Tiles.
I’m happy to be back today showing you the second part of our bathroom makeover! You can check out the first part right here on The Home Depot Blog! I must say I didn’t know how much of a difference adding peel and stick backsplash tiles to this space would change it. But what surprised me even more was the easy application of the peel and stick Smart Tiles!
Smart Tiles are made of an “adhesive substrate topped with a gel component called Gel-O (which gives it its 3-D effect).” Smart Tiles guarantees that their product will stick without adding extra glue and will never yellow or crack with time. The tiles are lightweight, easy to handle, cut and maintain, and they will remain on your walls for as long as you wish them to be!
With just a few easy steps, you can transform a backsplash or a wall like this in a few hours! For this space, I chose the Metro Grigio peel and stick backsplash. A medium gray color that mimics a 2 x 4 subway tile with gray grout. They have so many beautiful choices to choose from so I did have a hard time narrowing it down! My favorites are the Metro Blanco, and the Metro Carrera!
Smart Tiles come in a box just like this with simple instructions.
STEP 1: CLEAN THE WALLS
Before you apply the tiles make sure the walls are clean and free of any noticeable uneven bumps.
STEP 2: LEVEL THE TILES
Next use a level and trace a guide to make sure the tiles align correctly during the duration of the installation.
STEP 3: USE A TEMPLATE
Before any cuts were made I peeled the back of one tile and used it as a template. I marked where I needed to cut and reported it back to the tile. This works great especially when you have tight corners or harder cuts. So as you go, save the backs and you can continue to use them as templates when it’s time to cut!
STEP 4: PEEL THE TILES
Before you put the tile on the wall wipe off any material that may have come off the cuts.
Now peel off the back and align the adhesive portion with your guideline then apply a light pressure. Smooth out any bumps or air bubble that might form. But most importantly make sure that it’s straight. If you find that it’s not then quickly remove it and reapply to adjust.
Once you get on a roll you will be on your way! Keep checking to see if things are level along the way.
In order to line up the subway tiles if you are applying the Metro collection, you will overlap the tiles. Each tile collection has its own installation guidelines, so make sure to check!